Descrizione
ANTI-DUST AND STAIN PROTECTION TREATMENT FOR CONCRETE FLOORS FOR INTERIORS
COMPOSITION
Polyethylene and acrylic emulsions, polyurethane resins, self-levelling agents, essences, water.
PROFILE
P-OH7 is a product based on acrylic and polyurethane resins for the stain protection and anti-dust treatment of concrete floors.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
INTENDED USE
The product is intended for indoor concrete floors that a very porous and particularly vulnerable to oil stains and dirt in general. P-OH7 protects concrete floors against stains and dust, while giving a well-looked after appearance.
INSTRUCTIONS
Shake well before use. Always use at temperatures above +10°C. To prepare for treatment, the floor must be wash thoroughly. If you are treating new floors, simply use a suitable cleanser (e.g. our Micromax Extra) using a scrubber-dryer or single-brush floor cleaner. While if the floor is old and has various kinds of stains it must be degreased with specific cleansers (e.g. our Sgras Sg), rinsed and left to dry for at least 1/5 days. Do not use acid descalers as they react with the concrete, causing whitening. Apply a coat of P-OH7 with a fleece or applicator. After 1-2 hours apply another coat and possibly a third coat as described above. To increase the hydro-oil repellent protection apply a stain protection base (e.g. our Kripton HS or Follet C). The floor can be walked on after 4 hours. Always run some test applications before applying it to the definitive surfaces.
PROS
• Facilitates maintenance.
• Withstands repeated washes with neutral cleansers.
• Penetrates and saturates surfaces, protecting from dust.
• Ensures good mechanical resistance.
• It does not release harmful substances during application or after.
• Creates a pleasant effect.
• Prevents oily dirt from penetrating.
• Water-based product.
PROPERTIES
DILUTION: Ready for use.
DRYING/WALKABLE: after 2 hours.
TIME OF REACTION: 48 hours.
YIELD: Approximately 16-26 sqm/l per coat.
HOW TO CLEAN EQUIPMENT: Wash with water.
STORAGE: Closed in the original packaging, in a cool place away from frost and UV rays, it retains its properties for at least one year.
PACKAGING:
12 1-litre bottles.
4 5-litre buckets.
2 10-litre buckets.
CHARACTERISTICS
APPEARANCE: liquid
COLOUR: milky
ODOUR: pleasantly scented
ACTIVE INGREDIENTS: 16%
PH (20°C): 8.3
SPECIFIC WEIGHT (20°C): 1.014 kg/l
SOLUBILITY IN WATER: total
HEALTH
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP).
EUH210 Safety data sheet available on request.
No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.
