AP79L Manual Perfume Crimping Machine is simple to use and recommended for laboratory test or production of small quantities. With this model all valve and pump diameters will be crimped by changing the crimping head, from perfume pump diameters to 1” aerosol valves.
Dimensions: 25x30x70 cm
Net weight: 19 kg
Pneumatic crimping machine (semiautomatic action). This machine is recommended for small and medium production. Machine cycle starts by simple pressing of two “start” buttons (to be pressed at same time) placed on machine base. Excluding 1 inch size, all crimping heads can be mounted in order to crimp all pump sizes.
The semi automatic, pneumatic perfume crimping machine AP02 is the right compromise quality-price for a continuous medium to high production. Versatility and simple use are the main characteristics.
A special feature is the possibility to move incrementally (get near the bottle, for the first crimping adjustments with little shifts) and with low speed. With AP02 you can set up each crimping head to close every pump size in the market (1” valve crimping excluded).
Pneumatically assisted- manual perfume crimping machine.
AP01 is a simple perfume crimping machine suitable for glass bottle and aluminum 1″ can crimping.
This is the only pneumatic operated machine, in our range, that will allow you to crimp aluminum cans by a simple lever movement, the unit will place the bottle neck into crimping head (jaw) and start pneumatic ram cycle. This machine is recommended for small-medium scale production.
AP93L manual crimping machine is simple to use and recommended for limited perfume production. It’s built with a solid structure which supports the crimping head (a specific one for each different micropump size) and a support for the bottle. One rotation movement of the lever (approx. 100°) allows the approaching and the crimping operation. The quick replacement of the crimping head makes the machine exceptionally vesatile.
Non adjustable manual perfume crimping tool for micropump or aluminum cap crimping on bottles.
APM98 is simple to use, just place the crimping head on the neck of the bottle, and press on the levers to crimp. Simple use and cost efficiency are this device main characteristics, ready every time, no need to adjust. Available diameters: 13, 15, 17, 18, 20mm. Suitable for sampling only.
Continuous Ovens for Transformers – Industrial Ovens made in Italy by Idrocalor srl.
IDROCALOR’ovens are widely used in the drying treatments of dry-type, oil filled and cast resin transformers. The reliability and efficiency of our drying ovens assures the transformer’s highest performances and its long-lasting life. The working temperature range in this application goes from 80° to 160° C. The key factor for a high quality treatment resides in a masterful control of the air temperature uniformity.
Industrial Continuous Ovens for Electric Motors by Idrocalor Srl.
IDROCALOR’s ovens are used to dry cast resin motor insulation, as well as motor windings. The high-quality drying treatment provided by our ovens guarantees a quick and uniform drying of the windings. The working temperature range in this application goes from 120° to 220° C.
The key factor for a high quality treatment resides in a masterful control of the air temperature uniformity.
Industrial Ovens – Generic Continuous Ovens by Idrocalor Srl.
IDROCALOR is a leading company in the production of continuous ovens. According to your manufacturing flow and space requirements, our technical staff will work out the best solution.
These ovens operate on a continuous basis and are characterized by a conveyor system, which transports the product during the heating treatment. In order to guarantee the maximum level of customization, our continuous ovens are available in different sizes and configurations with working temperatures up to 1000° C.
Batch Ovens for Transformers – Industrial Batch Ovens made in Italy by Idrocalor Srl.
IDROCALOR’s ovens are widely used in the drying treatments of dry-type, oil filled and cast resin transformers.
The reliability and efficiency of our drying ovens assures the transformer’s highest performances and its long-lasting life. The working temperature range in this application goes from 80° to 160° C.
The key factor for a high quality treatment resides in a masterful control of the air temperature uniformity.
Generic Batch Ovens – Industrial Batch Ovens made in Italy by Idrocalor srl.
Idrocalor is specialized in designing and manufacturing of industrial batch ovens for a lot of different application fields, for an operating temperature of 50 to 1200 °C.
The quality of Idrocalor ovens ensures a uniform and reliable thermal treatment for your product, as well as a total safety for your operators even when an Atex Certification is required.
Awaken the strength of Vitamin C in a practical tablet.
5 Good Reasons to take Vita C:
1. Strengthens the immune system.
2. It contributes to protecting the cells from oxidant stress.
3. Favors the absorption of Iron.
4. Stimulates the normal formation of collagen for correct blood vessel functionality.
5. Supports the energy metabolism.
A PRODUCT BASED ON ACUTEINA AND ACE VITAMINS FOR
AN EFFECTIVENESS THAT CAN BE SEEN WITH NAKED EYE.
• Improves the function of the retina.
• Hinders eye aging by counteracting the action of free radicals.
• Reduces the risk of macular degeneration, especially in old age.
• Naturally protects eyes from sunlight due to the filter effect of lutein.
SOLLIEVO VENIS. The complete phlebotonic phyto-treatment for the well-being of your legs, based on fleboSTIM®plus, Troxerutin and Aescin from natural sources.
Multi-functional phlebo-tonics for a complete treatment. Supplements and products fro external use, to overcome heaviness, fatigue and swelling of the legs. True phyto-therapeutic effectiveness for venous insufficiency having marked venotonic action.
MAKE YOURSELF HEARD!
Sana Voce is Very useful in case of:
• hoarseness,
• dysphonia,
• aphonia,
• laryngitis,
• vocal cord fatigue.
Focus on the precious benefits of the main ingredients: SEDOX® (PLANTAIN), HEDGE MUSTARD (SINGER’S PLANT), MALLOW MUCILAGE, WHITE THYME, LAVENDER.
Grindelia: a great fellow to counter cough and better deal with disorders of the respiratory tract. This plant with amazing properties is present in all products of Erba Vita Respirando line.
Mucovit fluxus® Alleviates all types of cough, protect mucosa, sooths irritation, favours mucus elimination. Erba Vita medical devices are indicated for calming and soothing dry and productive cough and in a particular way, all types cough linked to inflammation of upper respiratory tract, even in children.
Scientifically advanced. Tested at the University of Siena.
Quick relief for irritated nose and throat, care in inflammatory processes and flu.
The traditional propolis is not soluble in water and this causes a low absorption and bioavailability tissue. PROPOLI EVSP® is soluble in water and is titrated to 50% in polyphenols.
Scientific evolution in body weight control: new offerings from Erba Vita research.
New Peso Stop range by Erba Vita: Phyto-therapeutic management of body weight control.
PESO STOP BURN – GREEN THERMOGENIC FORMULA.
Promotes weight loss, in all body types.
BURNS – DRIES UP – REDUCES – STIMULATES.
MAGNESIUM and POTASSIUM with VITAMIN C Acerola and Baobab.
Raise the levels of your ENERGY!
The new Magnesium and Potassium recharge with a high tissue assimilation, with the strength of Baobab and the boost of Acerola’s Vitamin C.
Natural products to combat hair parasites.
• BASED ON NEEM OIL AND ESSENTIAL OILS
• DOES NOT CONTAIN PESTICIDES
• SUITABLE FOR THE WHOLE FAMILY
• DELICATE ON SCALP AND HAIR
• NIT AND LOUSE REMOVAL COMB
REACTIVATE YOUR ENERGY!
Fulfills your daily energy requirement with the products of Energy line.
Erba Vita Energy Line: phytotherapic products enhanced by the most effective micronutrients.
Biological response is amplified by the best nutritional factors.
ENGAGE METABOLIC SYNDROME.
With Olivcomplex ® containing Olive, D-chiro-Inositol and Coenzyme Q10 useful to favor:
• carbohydrates metabolism;
• lipids metabolism;
• blood pressure regularity.
The natural shield for your wellbeing.
IMMUN ACTION LINE
Greater protection against external aggressions.
A new energy to strengthen the immune system.
Alterations of the intestinal flora?
LineaFlor a range of products for a balanced and efficient intestinal microflora.
From the Erba Vita laboratories comes the new Flor Line. New probiotic, species-specific strains selected based on scientific evidence.
ERBA VITA cares for all women, of all ages. A complete line of products created for the needs of every woman.
– MENOPAUSE AND BONE TISSUE
– PREGNANCY AND BREASTFEEDING
– MENSTRUAL CYCLE
LOCALIZED TENSIVE STATES? GO OUT WITH dol line. A line with all the indications to promote the wellbeing of the joints and to relief affected skin areas.
New Dol Line from Erba Vita: herbal medicine and dietary supplements for osteoarticular disorders.
A line of products, made from plant extracts and melatonin, to help promote good sleep and relieve the effects of jet-lag.
Combined treatment with products (herbal and nutritional) from the LIETOSON Line offered by Erba Vita.
Effective, clinically proven ingredients.
Based on Serenoa repens, Pumpkin, Pomegranate, Lycopene. A natural aid for the physiological health of the male urogenital system. Regulates disorders of the prostate and the urogenital system.
Helps to alleviate urinary tract irritation. Antioxidant action.
Slow intestine? With Erbalax all is forgotten.
NEW! FLAT STOMACH NEW FORMULA.
Strong, Delicate or Slim. Naturally helps intestinal transit.
Choose the Erbalax for you.
Drainantum is ideal for complete drainage and to combat the action of free radicals.
USEFUL FOR:
• water retention • heavy limbs • varicose veins, venous and lymph stasis • general swelling (due to liquid build up) • swelling due to menstruation or use of oral contraceptives • presence of oedemas • imperfections due to cellulite • calculi tendencies
DIGEST EV® is a complete natural product which has active principles useful to favor the physiological digestive process in its total complexity and in each of its stages.
Depuratum for an effective and natural detoxifying action.
Depuratum line by Erba Vita enables body purification and detoxification: the best possible choice to support both the natural and physiological function of the liver.
Garcinia: Equilibrio del peso corporeo, Controllo del senso di fame.
Erba Vita has developed Garcinia UHC (Ultra High Concentration) vegetable extract titrated to 60% in Hydroxycitric Acid (HCA).
Erba Vita’s R&D selected Curcuma extracts with higher bioavailability to ensure a more specific and targeted biological effect and anti-inflammatory action.
Erba Vita myCURCUM neuro contains Longvida extract:
a curcuma extract with high degree of neurocompliance.
The union of Vitamin B is a challenge of balance.
Buckwheat: precious natural source of Vitamin B.
From the Erba Vita laboratories B-APPORT PLUS is born.
specially formulated in accordance with the recommended daily allowance (RDA).
A NEW SOLUTION AND TWO GOOD REASONS TO MANAGE STRESS.
Laboratories Erba Vita launches its all new Anti-Stress products.
Two good reasons for recommending Stress Solution capsules:
1. The relaxing effect of Lactium in synergy with jujube and Theanine;
2. The tonic-adaptogenic action of the extracts, and the “anti-fatigue” effect of vitamins B and magnesium.
Targeted action against allergies.
Useful for the control and the reduction of allergic inflammation and inflammation caused by food.
Lumberjack Leather Women’s Shoes / Boots made in Italy.
code: SW42801-001D01CG001
Lumberjack Leather Boots made in Italy.
code: SW48801-001V26CB001
Lumberjack Leather Men’s Shoes made in Italy.
code: SW48804-002Q12CB001
Lumberjack Leather Men’s Boots made in Italy.
code: SW48803-001Q12CB001
Lumberjack Leather Boots made in Italy
SW49501-001Q12CB001
Lumberjack Boots made in Italy.
code: SW49503-001Q12CB001
Lumberjack Italian Footwear.
code: SW50001-001A01CH009
Lumberjack made in Italy Footwear.
code: SW50001-001A01CD016
Italian Footwear by Lumberjack.
Code: SW50001-002B36CB001
Lumberjack Winter Boots made in Italy.
code: SW50007-001B36CB001
Lumberjack Ankle Boots – black.
code: SW50703-001Q12CB001
Lumberjack Women’s Footwear made in Italy: Ankle Boots
code: SW50703-001Q12CE002
Lumberjack Women’s Ankle Boots made in Italy.
code: SW50703-002B01CE002
Lumberjack Women’s Ankle Boots made in Italy.
code: SW50703-002B01CB001
Lumberjack Women Boots made in Italy.
code: SW50707-001B01CB001
Lumberjack made in Italy Shoes.
code: SW52601-001M08CB001
Lumberjack Shoes Black – made in Italy
code: SW52605-002B01CB001
Lumberjack shoes made in Italy.
code: SW52605-002B01CH011
Lumberjack Footwear made in Italy
code: SW53001-001Q12CB001
Lumberjack made in Italy short boots.
Lumberjack Boots. Made in Italy Footwear.
code: SW53001-002Q12CB001
APILEGNO protects wooden surfaces from weathering and from mould and fungi. Suitable both for interiors and exteriors, it gives a waxed satin-finish, enhancing the natural beauty. It can be used on untreated wood and as a special maintenance treatment. Colours available apart from neutral: white, green, golden oak, larch, teak, chestnut, mahogany and walnut.
CERA ANTICA is a blend of fine waxes for finishing wooden items. It gives the treated item an antiqued and unique effect. For regular cleaning, do not use alcohol, acid, solvent or ammonia-based cleansers.
INTENDED USE
CERA ANTICA is a blend of fine waxes for finishing wooden items. It gives the treated item an antiqued and unique effect. For regular cleaning, do not use alcohol, acid, solvent or ammonia-based cleansers.
COROLLE is a blend of various oils of plant origin for treating and protecting parquet, whose components have been selected based on environmentally friendly criteria to achieve a natural treatment.
COROLLE may be used equally on all wooden surfaces, whether brushed, planed, jagged or smooth surfaces. COROLLE has the characteristic of being able to soak deep into the wood, becoming an integral part of it, giving it extraordinary strength and hardness. It maintains the original breathability virtually unchanged, resulting in osmotic exchange from the solid wood to the environment and vice versa.
GRAY-REMOVE is a solution of acids, surfactants and wetting agents used for removing old grey build-up (polyphenols) caused by stagnant water and the normal deterioration process due to weathering.
GRAY-REMOVE is used on several types of wooden surfaces, whether floors or vertical structures, to restore the original colour of wood (before the ageing process). It also removes tannic acid stains, even if the wood surface is protected, without ruining the treatment.
NATURAL PARQUET is a next generation product for the protection of indoor wooden floors. Completely colourless after application, it penetrates deeply into the wood fibres to make them impermeable to water, grease and stains, thanks to the size of the particles (fluorinated resins) and oil.
NUTRO-PARQUET is a natural wax oil in aqueous solution to be used as a preserving treatment on all indoor oiled surfaces, to nourish and protect wood.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
INTENDED USE
NUTRO-PARQUET enhances and protects oiled and waxed wooden floors, ensuring and increasing stain protection properties, facilitating routine maintenance.
OLIO DI LUNA is vegetable oil and wax emulsion based impregnator that provides a pleasing aesthetic appearance and offers protection against stains to wooden services as well as simple maintenance. Available in different colours to obtain unique effects.
IMPORTANT: For regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
Designed to protect parquet, PRIMO LEGNO is a special paint that gives structures a natural, soft appearance.
IMPORTANT: For regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
INTENDED USE
PRIMO LEGNO offers a stain and dirt resistant treatment and an excellent protection against water, on all types of wood.
PERLAGE ORO wax is a new concept wax which, thanks to its components and the thin layering, nourishes and protects varnished parquet surfaces, protecting them from wear and from dirt.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
RIFLESSO is a blend of special waxes and resins for the restoration of marble, granite, composite materials, to polish surfaces made of terracotta, natural stone, linoleum and cement.
Thanks to its special formula, it provides a mirror like polish similar to lead polishing.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
NEOCOT is a water-based liquid wax that gives items a semi-gloss finish and at the same time increases stain protection properties. To be used as a preserving and finishing product after the priming treatment outdoors. Facilitates maintenance operations.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
MICROMAX EXTRA is a concentrated cleanser that removes stains, dewaxes and cleans very dirty floors.
INTENDED USE
MICROMAX EXTRA is a product with multiples uses, which differ according to the dilution for the various purposes and requirements. Suitable for cleaning floors in porcelain stoneware, ceramic, natural stone, concrete, cotto and wood. It is used to remove the residues of epoxy grout.
FOLLET-C is an alcohol-water emulsion of silanes and fluorinated copolymers with hydro-oil repellent properties, capable of decreasing surface tension and creating a pleasant slightly toned effect. The particular features of the product make it extremely versatile in providing anti-efflorescence action together with stain and mould protection. IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
Resin-wax emulsions, carnauba wax, beeswax, propolis, essences, water.
PROFILE
COTTOLUX is a combination of special waxes, suitable for the special maintenance of floors. It reinforces and provides safe and complete restoration, giving treated floors a well looked after appearance and waxy and natural effect.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
SINTESI 3/P is a combination of various types of fine wax emulsions with stain protection properties, featuring excellent wettability and high substrate bonding ability. As well as high resistance to wear, SINTESI 3/P gives floors a satin-finish result.
IMPRETEX MK-65 is a product that, applied to terraces and balconies, penetrates deeply interacting chemically on the surface, becoming an integral part of it and decreasing the surface tension (hydrorepellence). It is the right solution for preventing water from penetrating into the pores of the capillaries, giving real waterproofing protection.
DECERWAX is a mixture of specific hydro-solvents, inorganic alkalis, surfactants and special wetting agents with multiple characteristics.
INTENDED USE
DECERWAX acts fast on all types of surfaces: cotto, clinker, stoneware, ceramic, marble, concrete, etc… It removes old layers of oil and wax-based treatments ensuring complete and maximum dewaxing effectiveness. It also removes mould and grease stains. On new floors it facilitates the removal of oxidation (dark marks). It must not be used on resilient flooring.
MISTRALL is the result of extensive research with a special high concentration formula for cleaning and treating various surfaces. Thanks to its special formulation, as well as providing a sanitising and brightening action, it prevents the formation of mould, bacteria, pathogenic germs. Available in pine/mint-scented and lemon-scented.
COMPOSITION
Polyethylene and acrylic emulsions, polyurethane resins, self-levelling agents, essences, water.
PROFILE
P-OH7 is a product based on acrylic and polyurethane resins for the stain protection and anti-dust treatment of concrete floors.
IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
COMPOSITION
Soap made of potassium cocoate combined with safflower oil, essences, water.
PROFILE
SAPONE & OLIO is a product based on natural soap and oil, which can be diluted in all proportions with water.
INTENDED USE
SAPONE & OLIO is a formulation to be used for cleaning and preserving oiled wooden floors, indoors and outdoors. Its main feature is that it cleanses surfaces while depositing a protective layer that increases resistance.
SOLVENT FOR CLEANING AND FOR DILUTE POLYCHLOROPRENE ADHESIVE
S 700 is a solvent mixture to dilute polychloroprene adhesive type “CU”.
Excellent also to clean brushes and machinery.
Ecological Natural Rubber Based Adhesive with High Viscosity.
Super Light Eco – Mastic is an ecological natural rubber based glue used for the construction of uppers in bondings. Leather will keep flexibility throught time. Apply with a brush to both sides.
VINYL BASED ADHESIVE FOR WOOD BONDINGS WITH HIGH VISCOSTY
Apavil 90 is a plasticized polyvinyl acetate acqueous dispersion with quick initial setting time. It can be used in hot and cold conditions. Brush application.
Pure Latex Water Based Adhesive is ideal for solution appliers with rolls.
The PURE LATEX is a water based adhesive of natural rubber’s latex used for assembly of lining, cover with leather and various process of Juntery.
The ECO-AUTOMASTIK is a NATURAL RUBBER ADHESIVE used on the general processing of JUNTERY. Adapt for who wants to apply the glue only on a part. It is called ECO because the company uses only raw materials with law environmental impact.
The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR.
Trasparent Adhesive for inner Soles – Footwear Adhesives
The NEOPRENE 3S is a plychloroprene transparent adhesive with strong grip , medium opend time uesd for sticking sides of the inner soles. Thanks to its peculiar transaparency is especially used for leather goods or by leather company.
EXTRA STRONG POLYCHLOROPRENE ADHESIVE WITH MEDIUM HIGH
VISCOSITY
CU 1000 is a polychloroprene adhesive for shoe industry, specially formulated to stick, leather soles, crust, ecc. High heat resistance. High quality. Brush application
Leather Sole Adhesive
The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH.
The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood – textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials.
Gonzatto Cherry jam is produced and manufactured using traditional methods that preserve the flavor and aroma of the fruit as if it were freshly picked.
The cherries are processed after being picked at the right moment of ripeness. The jam is produced without the addition of sugars, dyes or artificial flavors.
A fresh fruit Smoothie with little sugar ideal for breakfast, spread on bread or mixed with yogurt.
Weight: 390 g
Gonzatto Farm produces 100% Made in Italy Cherry Marmalade.
Our Cherry Marmalade have many pieces of fruit and it’s produced and manufactured using traditional methods that preserve the flavor and aroma of the fruit as if it were freshly picked.
The cherries are processed after being picked at the right moment of ripeness. The jam is produced without the addition of sugars, dyes or artificial flavors.
Cherry jam, low in sugar, ideal for filling and decorate cakes.
Weight: 320 g
Camellia bracelet elastic natural stones bronze
Camellia bracelet flexible with mother of pearl, quartz and pearls, agate, pearls, labradorite. Bronze.
ESTROSIA jewelry is looking new distributors worldwide
BRANCH BRACELET QUARTZ SILVER
Branch bracelet with quartz mixed. Bronze.
ESTROSIA COLLECTION
ELASTIC BRACELET ROUND STONES SILVER
Elastic bracelets bands with pearls, aquamarine, coral, pyrite. Silver 925.
ESTROSIA COLLECTION
BRACKET BRACELET NATURAL STONE SILVER
Bracelet with bracket satin and natural stone: acquamarina, opal rosa, emerald agata. Silver 925, gold plated.
ESTROSIA COLLECTION
CIRCLES NECKLACE TURQUOISE BRONZE SILVER
Necklace long acquamarina, chrysocolla bronze and silver 925, gold plated.
ESTROSIA COLLECTION
ESTROSIA CREW-NECK PEARL BRONZE
Crew-neck white pearls with mesh with chain. Silver 925, gold plated.
ESTROSIA COLLECTION
NECKLACES VOLCANO SILVER BRONZE
Necklace pendant bronze coral, turquoise, pearl, chrysoprase. Silver 925, gold plated.
ESTROSIA COLLECTION
BRANCH RING NATURAL STONE SILVER
Branch ring with natural stone: kyanite/coral/labradorite/corniola. Silver 925, gold plated.
ESTROSIA COLLECTION
SILVER RING NATURAL STONE
Oval ring stone quartz: emerald/chrysoprase/sky. Silver 925, gold plated.
ESTROSIA COLLECTION
OVAL SILVER STONE RING GRID
Oval stone ring in coral, kyanite, pearl. Silver 925, gold plated.
ESTROSIA COLLECTION
BOUGAINVILLEA EARRINGS QUARTZ SILVER
Earring with pin quartz : emerald / green water. Silver 925 gold plated.
ESTROSIA COLLECTION
EARRINGS CASCADE NATURAL STONE SILVER
Earrings cascade with pin pearls, quartz, chrysoprase, corniola. 925 Silver gold plated.
ESTROSIA COLLECTION
BUTTON EARRINGS NATURAL STONE SILVER
Button earrings with pin clips natural stone: calcedonio, kyanite, pearl, turquoise, agata fuxia. Silver 925.
ESTROSIA COLLECTION
TRIANGLE EARRING DROP QUARTZ PEARL SILVER
Pearl earring with pin, quartz: turquoise/green water/ruby. Silver 925 gold plated.
ESTROSIA COLLECTION
BAND RING NATURAL STONE SILVER
Ring with labradorite, chrysoprase. Silver 925.
ESTROSIA COLLECTION
SILVER FANTASIA RING PEARL
Ring with pearl and natural stone: coral/chrysoprase/tourmalines. Silver 925.
ESTROSIA COLLECTION
For those who wish to experience the authentic cuisine of a wood-burning oven for excellent quality but at an affordable prince, this model is the ideal one
Adaptable to very situation, practical and easy to handle.
Like a models of the top of the range, the oven Pandora has a double inox 304 painting, that allows a full protection of the 2 refractory walls.
The smallest oven of our range, easy, practical and economic to use
Designed for lifting in systems with a capacity of 1000 da N
Designed for lifting in systems with a capacity of 800 daN
Produced for system with a 630 daN
Produced for system with a 480 daN.
Extremely compact dimensions and Produced for system with a 480 daN
Designed for lifting in the context of standard systems with a capacity of 480daN using a 520 mm pulley. Equipped with design features which facilitate installation in three different positions to fix it to the frame. This layout enables the operator to use the same unit for installation in the right, left and vertical positions.
Fluoplan is an Isoltech technology for the production of fluid composite screed, made of sand and non-premixed cement.
Fluoplan meets the growing needs for global solutions, which require a composite screed made up of Fluoplan,Fluotech sound insulating mat, cellular concrete realized with ISOCEM S/L.
INCREMENT D 1300 technology is a revolutionary innovation in the screeds branch because it permits to have durable, reliable, lightweight, thermal and acoustic insulating screeds. Increment D 1300 allows also important savings of material and labour.
In bilayer screed, cellular concrete is used especially as insulating underlayer.
Isoltech’s 3C blocks: for a faster, cleaner and more precise assembly.
Manual Plant to produce Cellular Concrete Blocks
Our medical laminates (roll-goods) are mainly applied for the production of surgical drapes, healthcare applications drapes, surgical-gowns reinforcement and protective clothing.
They are composed of one or more Nonwoven layers laminated onto a soft, antimicrobial microembossed multi-layer (Cast Coex) Polyolefinic film or Breathable membrane.
Gambini Meccanica manufactures precision gears up to module 30, with just milled or ground profiles, with straight tooth system, right or left-hand with any possible inclination. The maximum external diameter we can realize is up to 1000 mm. We use different raw materials: C45,
18NiCrMo5, 20MnCr5, all the alloy or not alloy materials, different types of nylon, cast irons, alloys of common bronze and bronze-aluminium, alloys of aluminium, stainless steel and different typologies of Bakelite.
Gambini Meccanica manufactures precision gears up to module 30, with just milled or ground profiles, with helical tooth system, right or left-hand with any possible inclination. The maximum external diameter we can realize is up to 1000 mm. We use different raw materials: C45, 18NiCrMo5, 20MnCr5, all the alloy or not alloy materials, different types of nylon, cast irons, alloys of common bronze and bronze-aluminium, alloys of aluminium, stainless steel and different typologies of Bakelite.
Gambini Meccanica realizes round racks, with ground or cold drawn raw
materials, with straight or helical tooth system, right- or left-hand.
Quality classes and modules which can be realized are the standard ones and the length is up to 3000 mm. The most common raw materials employed are the following ones: C45 and stainless steel.
Gambini Meccanica manufactures top quality racks both with straight and
helical tooth system by employing several typologies of raw materials. We
produce racks from module 0.5 until module 42, from quality 5 to quality
10.
Spline shafts up to 550 mm long, up to 120 mm external diameter with helical and straight toothing
Worm screws from module 0.5 to module 10 up to 100 mm diameter, both ground and toothed
Toothing with a crowned profile or a conical profile up to max + – 10
Spur and helical gears from module 0.5 with an external diameter of 10 mm up to module 10 with an external diameter of 500 mm
Liquid detergent Oil Cleaner with high degreasing and cleaning power even on pigment stains, suitable for prespotting.
Degreasing for collars and cuffs
Superconcentrated Softener with the fresh scent and delicate of white musk
It must be used in the last rinse, reconditions and restructures the fibers giving them the original hand.
Pre-spotting agent for pre-spraying or brushing DRY K
Excellent cleaning effect. Easy to rinse , it leaves no greyings on pre-brushed areas. Kindly to skin.
Reinforcer and dry-cleaning pre-spotter Eco Breeze to be used in perchloroethylene, with antistatic and
deodorising action. Long persistent fresh odour.
Reconditioning softener for all fibers. Use in the last rinse.
Liquid additive softener Forever with a long lasting perfume. Forever is a concentrated liquid softener to be used in professional laundries with professional washing machines.
Plastic Head Bow Compass with levers and fixed legs
Plastic Head Bow Compass with levers and fixed legs
Metal Handle Bow Compass with levers and jointed legs
Full metal Bow compass and plastic cover on top, with levers and jointed legs
Full metal Bow Compass and plastic cover on top, with levers and jointed legs .
Metal silos for the storing of food products, monobloc built following vertical cylindrical execution and conical unload.
Attentive to customers’ needs, dynamic and committed to improving production
processes since ever, Agriflex is now focusing on FLOUR TEMPERATURE
CONTROL in the dough mixing room, which is crucial to ensure CONSTANT
and OPTIMUM quality, both in industrial and small-scale production of baked
goods.
This microdosing system has been conceived in a way to allow dosing of n. 3 microingredients – as requested by the customer – and to grant 8 batches / H. The units have a capacity of 100 Lt, usually enough to store 50 Kg of improver (depending on its specific weight).
Metal silos for the storing of food products, monobloc built following vertical cylindrical execution and conical unload.
Externally in stainless steel AISI 304 or 316. Loading pipe included: 101.6mm; positioned centrally above silo
Inspection portal for internal inspection.
Find Agriflex automatic fermenter . It works in different functional stages.
Le uve utilizzate per il Vigneto Contrada Vallone provengono dal vigneto più vecchio dell’azienda, esattamente dalla particella dei vigneti N°145, proprio dove è situata la cantina. Questo vino si ottiene da uve Montepulciano e Sangiovese, che lo rendono un vino strutturato e piacevole da bere. La raccolta viene fatta in cassette di max 20kg. La fermentazione avviene con una classica vinificazione Bordolese, della durata di 12-15 giorni tra fermentazione pre- e post-fermentativa sulle bucce, con uno schema di rimontaggi e controllo della temperatura dai 18° ai 26° C. Dopo la svinatura il vino viene fatto invecchiare in barrique francesi sia nuove che di primo passaggio per almeno 8-10 mesi. A seguito dell’imbottigliamento il vino viene fatto riposare altri 4-6 mesi in bottiglia.
La zona di produzione del Pecorino si identifica nella fascia collinare che va dall’Alto Maceratese all’Abruzzo. Questo antico vitigno quasi scomparso negli anni ’70, in quanto vitigno di scarsa produzione, fu recuperato da alcuni viticoltori marchigiani. Il vitigno Pecorino dà vini di ottima struttura sia alcolica che di acidità totale. Le raccolte vengono effettuate a mano in cassette di max 20 kg. La fermentazione avviene a temperatura controllata dai 18°-20° gradi in botti d’acciaio. Dopodiché il vino rimane sui lieviti fino al mese di marzo. L’affinamento in bottiglia va dai 45 ai 60 giorni.
Solid rubber seal for rotary shaft produced in only one piece. Perfect solution to prevent contamination of dirt, dust or water. It can be used as a secondary seal to protect primary seals.
The V-Ring is a sealing easy to be used and to be mounted since it is self retaining on the shaft, that doesn’t need a special finishing grade and tolerance. The contact area can have a roughness Ra from 0.5 to 1.6 according to the speed and the media to be sealed.
Double acting piston seals are designed for alternating applications in oleodynamic and pneumatic range, made in NBR compound with an hardness of 85° Shore A. They are fitted with expansion-springs, able to ensure a right pressure on the radial contact, in order to grant the following limits.
The beach cleaner works mechanically taking the motion directly from the PTO of the tractor, to which is connected with the three point linkage, which also adjusts the working depth from 0 to 15 cm for a width of cm. 160.
This machine is equipped with a fix blade that collects sand and rubbles at the required depth and for a width of 160 cm. Sand and rubbles are convoyed in a sifter with a vertical movement, so that the rubbles are left in a collector basket meanwhile the sand falls down.
The Rod wiper for alternative linear movements is indispensable to give first class protection to the oil seals and the guiding tools in hydraulic and pneumatic equipment.
The main function of the wiper seal is to guarantee the cleaning of the rod from any possible external impurity. The FP wiper seals show a chamfer on the outside diameter to facilitate its fitting into the housing.
To simplify the installation, the housing should have a chamfer fo 2 x 15 – 20°.
These products are made out of NBR and FKM compounds, resistant to mineral oils, greases, aqueous solutions ecc…, with a hardness of approx. 85 Sh A.
The Beach cleaning operates via a loading roller carrying sand and debris in a sieve, of the machine width, with traverse movement, that allows to deposit the debris in a basket of garbage collection and drop the clean sand.
The rotary shaft oil seal is an indispensable component in a lubricated rotating shaft.
The production of the •FP• rotary shaft seals series offers a solution to any problem of sealing.
Characteristics of The materials
The •FP• rotary shaft oil seals, are produced according to modern designing and engineering techniques, and with top performance materials as requested by their using conditions.
This machine is equipped with a fix blade that collects sand and rubbles at the required depth and for a width of 120 cm. Sand and rubbles are convoyed in a sifter with a vertical movement, so that the rubbles are left in a collector basket meanwhile the sand falls down.
The beach cleaner mod. Barracuda can operate on small and medium sizes beaches.
It is equipped with Honda engine and it works with a real width of 90 cm. and with a working depth from 0 to 10 cm. Its working capacity is of about 2.500 m/h.
The beach cleaner works mechanically taking the motion directly from the PTO of the tractor, to which is connected with the three point linkage, which also adjusts the working depth from 0 to 15 cm for a width of cm. 160.
This code identifies a line of bearings that are specially manufactured to allow the bonding of a filled PTFE coated fabric (lead free, in accordance to the European Parliament “ELV” directive 2000/53/EC) on four types of backing metal layers, like carbon steel, bronze, stainless steel and Inconel 625.
The Sliding Surface is primarily composed of filled PTFE coated fabric, and other elements to guarantee the high wear resistance. The TX products find their best usage in slow-moving applications, with heavy loads, and where dry operation is required. Thanks to the thick self-lubricating layer up to 0,4 mm, this product has a high wear resistance, and can work in dirty or abrasive environment.
For this product it is not recommended the use of oil, while the use of special grease, such as silicon or lithium soap, is only possible during the assembly.
The TF type is a composite multilayer material used in the manufacture of dry self-lubricating Sliding Bearings.
The main parts composing this product are a filled modified PTFE layer (lead free, in accordance to the European Parliament “ELV” directive 2000/53/EC) for the sliding self-lubricating surface, and a special primer used to allow the sintering of the PTFE layer to four types of baking metal layers, like carbon steel, bronze, stainless steel and Inconel 625.
Thanks to its structure, the TF type provides an excellent match between the mechanical strength of the steel, and the low coefficient of friction due to the modified PTFE sliding layer.
This is a product, that can be used in applications with medium loads, and in a clean environment with low levels of abrasive elements such as metal powders. It can also be used with special mineral oils and specific greases such as silicone compounds or lithium soap.
Il nome di questo vino ha origini lontane ed è preso dall’antico nome della zona a ridosso delle attuali tenute Rio Maggio. All’epoca dei primi insediamenti (età di Nerva 96-98 d.C.) la zona si chiamava appunto Telusiano, oggi conosciuta col nome di Monte San Giusto. La chiesa del paese, di origine romanica, porta il nome di Santa Maria della Pietà in Telusiano, e in essa si può ammirare la grandiosa pala della Crocifissione, capolavoro di Lorenzo Lotto, che per questa solenne opera fu pagato in fiorini e in olio di olive ascolane.
Stator packets riveted diameter 42×21,55 length 35mm and 120mm, 12 slots and aluminium Rotor die cast diameter 20,92 length 35mm and 120mm, 17 slots ( with ring in sinter material for magnetic brake too )
Stator packet riveted diameter 64×38 length 90mm, 24 slots and aluminium Rotor die cast diameter 38 length 90mm, 18 slots – our catalogue Stator and Rotor lamination Model 100AR – Stator and Rotor for AC motors for rolling shutter – Raw material: Non grain oriented electrical steel, finally annealed
(according to DIN EN 10106 )
Stator packets riveted diameter 33×18 length 80mm and 100mm, 12 slots and aluminium Rotor die cast diameter 18 length 80mm and 100mm, 16 and 19 slots ( with ring in sinter material for magnetic brake too ) – our catalogue Stator and Rotor lamination Model 97R and Model 97E – Stator and Rotor for AC motors for rolling shutter and vibrating motor – Raw material: Non grain oriented electrical steel, finally annealed ( according to DIN EN 10106 )
Stator packet riveted diameter 80x72x45 length 80mm, 24 slots and aluminium Rotor die cast diameter 45 length 80mm, 22 slots – our catalogue Stator and Rotor lamination Model 101DS – Stator and Rotor for AC motors for rolling shutter and sliding gate
Nuova Volonterio produces rotors in aluminium and silumin ( aluminium alloy ). Range of Rotor diameter is from 17,4mm up to 135mm but we are specialized in Rotor die cast with small diameter and high length, mainly for tubular motors and vibrating motors
Nuova Volonterio produces Stator loose laminations with progressive tools with an external diameter from 33mm up to 200mm
MODERN LEAF dedicated to maple syrup Glass bottle
A new brilliant design dedicated to maple syrup. The half leaf visible in transparency from each side
makes this bottle difficult to forget. It exists in 50-100-250-500ml, screw finish and flint color.
The half-sphere carafe Sommelier, flint glass and 200ml size , is the perfect choice not only for spirits but also for room fragrances and catalytic fragrance lamps.
Calamaio is A small jewel in our collection. Best solution for “testing products” or spices. It is available in flint, 30 and 60 ml.
It recalls the cut of precious stones thanks to the light games on the glass surface. Mainly used for spirits, as grappa or Armagnac but also for premium EVOO. Flint colored, sizes: 200-500-700ml
A slender, thin, flint bottle for all your products – available in 375 and 500ml , cork finish. Perfect for
spirits.
Peel Touch is a professional skin peel that yields excellent results. Practical and easy to use: the packaging contains 5×5 ml bottles with dropper to dose the product and reduce waste.
35% TCA: thanks to the right ratio between TCA and other components, Peel Touch ensures firming and smoothing effects, immediately improves skin complexion and texture, and considerably reduces small wrinkles.
Moreover, the presence of Kojic Acid adds a depigmenting effect, especially on dark melanin patches.
Bioformula protects, enhances and promotes the original Italian product: Peel Touch has been designed, developed and created in our laboratories and is certified as a Class I medical device in order to ensure its full safety and traceability.
Created and entirely made within our Italian laboratories by highly qualified staff with high quality raw materials, this product ensures surprising results from the very first injection.
Actually, Bioformula® is well-known to produce its products using Hyaluronic acid with the higher standards of molecular weight (average value 3.2 kDa) – which represents the ideal raw material choice.
The high molecular weight means a greater length of the HA chain which provides Jalucomplex® a much longer durability compared to other HA available: this means the product has a greater maintenance, boasting extraordinary and long lasting results.
Plenhyage THE NEW CONCEPT OF REGENERATIVE MEDICINE IN THREE STAGES:
SKIN REPAIR, CELLULAR RENEWAL AND TISSUE REGENERATION for Face and Body
AN INNOVATIVE TREATMENT IN A SINGLE POLYNUCLEOTIDE-BASED PRODUCT THAT EFFECTIVELY REPAIRS SKIN DAMAGE AND GUARANTEES OPTIMUM PERFORMANCE!
Auralya is a sterile, injectable, non-pyrogenic, reabsorbable medical product made out of
reticulated hyaluronic acid of non-animal origin, produced via bacterial fermentation. Auralya
is a colourless gel contained in a pre-filled, graduated, disposable, and sterile syringe with a
Luer adapter.
Evanthia is a sterile, injectable, non-pyrogenic, reabsorbable medical product made out of reticulated hyaluronic acid of non-animal origin, produced via bacterial fermentation. Evanthia is a colourless gel contained in a pre-filled, graduated, disposable, and sterile syringe with a Luer adapter.
Monte del Grano – Falerio dei Colli Ascolani D.O.C.
Vitigni: Trebbiano 40% – Pecorino 30% – Passerina 30%
Il Rosso Piceno è certamente il vino rosso più diffuso nella Regione Marche in Italia.
Vitigni: 50% Montepulciano – 50% Sangiovese
Bacco fancy Glass Bottle is the heaviest version (around 1000 grams of glass) is a key player in its sector; it exists in the capacity 750 ml, green color. The lighter version has the same shape but it is more functional – less glass, more competitive price.
Visible flame view for outdoor use. A wonderful outdoor garden furniture, a lamp/patio heater combined in a single designed item. Keep your outdoor warm, stylish and attractive. Choose Lightfire-Dolcevita. A lamp/patio heater combined in a single designed item . Radiant heating flow along the glass tube.
Polished Stainless Steel. Led lighting kit with an optional rechargeable battery. Automatic and manual models. Also available special model Lightfire Energy Producing with Seebeck Effect: the heat generated by the flame is transformed in electricity.
The black olive paste is obtained from the processing of olives harvested at the best time of ripening; the olives are ground using special machinery until the mixture, to which is added salt and extra virgin olive oil.
The black olive pate can be eaten in various ways. No matter whether you eat it as a spread on freshly baked bread, or if you add it to the pasta sauce, it will enrich your dish!
Salsa flavor that perfectly fits the seasoning of pasta (pasta), main courses (red, white meat, fish, game) and great on sandwiches and appetizers.
Gonzatto Farm produces black olive paste, 100% Made in Italy near Garda Lake
Weight gr.180
The green olive paste produce by Gonzatto farm is obtained from the processing of olives harvested at the best time of maturation.
Green olives are ground using special machinery until the mixture, to which is added salt and extra virgin olive oil.
The green olive paste can be eaten in various ways. No matter whether you eat it as a spread on freshly baked bread, or if you add it to the pasta sauce, it will enrich your dish!
Delicate sauce, ideal for tartine, bruschetta, appetizers, red, white meats and game.
Weight gr. 180
100% Italian Extra Virgin Olive Oil first cold pressed from olives harvested by hand in the olive groves that grow in Veneto Area (Italy), an area near Garda Lake with a traditional vocation for cultivating olives.
Our Farm is in a privileged position, with special climatic conditions and a calcareous soil, produce a green oil, fruity and an unmistakable flavor of olives, definitely herbaceous with prominent hints of artichokes and green almond.
Production area: 100% Italy – Veneto – Garda Lake Area
Pressing Mode: continuous cold;
Color: golden yellow with green hues;
Flavour: intense and fruity;
Particularities: enriches dishes with intense flavours and determined;
Serving suggestions: ideal with pasta dishes, white meats, bruschette and cold dishes;
Size: Lt.5 Tin
Gonzatto Extra Virgin Olive Oil, 100% Italian, first cold pressed from olives harvested by hand in the olive groves that grow in Veneto Area (Italy), an area near Garda Lake with a traditional vocation for cultivating olives.
Our Farm is in a privileged position, with special climatic conditions and a calcareous soil, produce a green oil, fruity and an unmistakable flavor of olives, definitely herbaceous with prominent hints of artichokes and green almond.
Production area: 100% Italy – Veneto – Garda Lake Area
Gonzatto Extra Virgin Olive Oil first cold pressed from olives harvested by hand in the olive groves that grow in Veneto Area (Italy), an area near Garda Lake with a traditional vocation for cultivating olives.
Our Farm is in a privileged position, with special climatic conditions and a calcareous soil, produce a green oil, fruity and an unmistakable flavor of olives, definitely herbaceous with prominent hints of artichokes and green almond.
Production area: 100% Italy – Veneto – Garda Lake Area
Pressing Mode: continuous cold;
Color: golden yellow with green hues;
Flavour: intense and fruity;
Particularities: enriches dishes with intense flavours and determined;
Serving suggestions: ideal with pasta dishes, white meats, bruschette and cold dishes;
Size: 0,75 L Bottle.
Central Pole Parasol
Structure made of 2 (Double) or 4 (Poker) parasols fixed at the same pole, suitable for big surfaces and minimum encumbrance.
Strong structure made of 4 cantilever parasols (Poker) or 2 cantilever parasols (Double).
Frame: Iroko wood varnished and treated. Steel components powder coated anthracite grey.
Nylon accessories.
GRAPE VARIETY: Cabernet Franc single varietal wine.
TYPE OF TERRAIN: Argillaceous, Calcareous, with zones enjoying particular microclimatic conditions.
CULTIVATION: Guyot, planting density 4.000 Plants/Ha.
HARVEST PERIOD: Middle of October.
VINIFICATION: Careful grape selection and thorough inspection during the pressing phase followed by slow fermentation at controlled temperatures with daily plunging for 14-20 days.
Bottle ageing for 3-4 months.
CELLARING POTENTIAL: 3-5 years from production.
COLOUR: Intense red ruby with garnet tints.
NOSE: Rich, persistent bouquet with intense hints of jam, good intensity, balanced.
FLAVOUR: Elegant, aromatic and highly persistent.
Light in the mouth, with good expansion and acidity enabling good balance.
PAIRINGS: Pairs well with red meat, chicken and game.
SERVING TEMPERATURE: 18° C.
PACKAGING: 0,75 l bottle, bottled in cartons containing 6 bottles.
GRAPE VARIETY: Cabernet Sauvignon single varietal wine.
TYPE OF TERRAIN: Argillaceous, Calcareous, with zones enjoying particular microclimatic conditions.
CULTIVATION: Guyot, planting density 5.000 Plants/Ha.
HARVEST PERIOD: Thirs week of October.
VINIFICATION: Medium duration maceration extending for 12-15 days with daily plunging at a controlled temperature. Maturation in steel.Followed by bottle ageing for 3/4 months.
CELLARING POTENTIAL: 4 – 5 years from production.
COLOUR: Intense red ruby with purple shades.
NOSE: Full and interesting balance between fruity and spicy notes.
FLAVOUR: Pleasurable, austere, maintains pleasing fruitiness sustained by a solid, smooth body.
PAIRINGS: Ideal for red meat roasts, braised beef, game.
SERVING TEMPERATURE: 18° C.
PACKAGING: 0,75 l bottle, bottled in cartons containing 6 bottles.
GRAPE VARIETY: Chardonnay single varietal wine.
TYPE OF TERRAIN: Argillaceous, Calcareous, rich in microelements.
CULTIVATION: Guyot, planting density 4.000 Plants/Ha.
HARVEST PERIOD: End of September.
VINIFICATION: After a brief decantation, 24 hour pre-fermentation cold maceration at a controlled temperature. Once fermentation is completed, it remains in contact with fine dregs until March.
CELLARING POTENTIAL: 2-3 years from production.
COLOUR: Bright straw yellow, high brightness.
NOSE: Distinctive and elegant with fruity notes of apple, banana, vanilla and a fragrant aroma of white flowers.
FLAVOUR: Fresh, lively and highly pleasurable with optimal persistence, good structure.
PAIRINGS: Used for aperitifs with appetisers and fish courses.
SERVING TEMPERATURE: Approx. 12° C.
PACKAGING: 0,75 l bottle, bottled in cartons containing 6 bottles.
GRAPE VARIETY: Pinot Grigio single varietal wine.
TYPE OF TERRAIN: Argillaceous, Calcareous, rich in microelements.
CULTIVATION: Guyot, planting density 4.000 Plants/Ha.
HARVEST PERIOD: First week of September.
VINIFICATION: 48 hour pre-fermentation cold maceration, soft grape pressing, fermentation at a controlled temperature and later maturation in steel basins in contact with ferments.
CELLARING POTENTIAL: 2-3 years from production.
COLOUR: Amber yellow with light copper tints.
NOSE: Fine and elegant with a pungent bouquets with floral, very persistent notes.
FLAVOUR: Evident sensations of white fruit on the palate giving wine freshness and softness.
PAIRINGS: Pairs will with soups and egg and fish dishes.
SERVING TEMPERATURE: Approx. 10 -12° C.
PACKAGING: 0,75 l bottle, bottled in cartons containing 6 bottles.
GRAPE VARIETY: Pinot Bianco single varietal wine.
TYPE OF TERRAIN: Argillaceous, Calcareous, rich in microelements.
CULTIVATION: Guyot, planting density 4.000 Plants/Ha.
HARVEST PERIOD: Early October.
VINIFICATION: 24 hour pre-fermentation cold maceration, soft grape pressing, alcoholic fermentation at a controlled temperature and later maturation in its own dregs for several months.
CELLARING POTENTIAL: 2 – 3 years from production.
COLOUR: Straw yellow laden with bright golden tints.
NOSE: Aroma of exotic aged fruit, yellow peach, notes of sweet spices.
FLAVOUR: Smooth and warm in the mouth while also enveloping, balanced and rich in aroma.
PAIRINGS: Pairs well as an aperitif to accompany simple appetisers and delicate fish entrées.
SERVING TEMPERATURE: Approx. 10 – 12° C.
PACKAGING: 0,75 l bottle, bottled in cartons containing 6 bottles.
GRAPE VARIETY: Pure Prosecco-Brut.
TERRAIN: silt-clay, limestone soil rich with microelements.
CULTIVATION: Guyot, with a density of 4.000Plants/hectare.
HARVEST PERIOD: Second half of September.
VINIFICATION: Soft pressing of the grapes in a reducing environment. Fermentation at a controlled temperature of 15°C to obtain a clean base wine. Second fermentation according to the Charmat method for 20 days at a controlled temperature of around 14°C.
CELLARING POTENTIAL: 1-2 years from production; optimum maturity 1 year.
COLOUR: Straw yellow with greenisch reflectionss.
BOUQUET: Winey, fruity, hints of apple, floral, wisteria and crusty bread.
FLAVOUR: vibrant, pleasant with a balanced taste between acidity and sugars and fruity aftertaste.
PAIRINGS: This wine is ideal as an aperitif, with seafood starters, light risottos, excellent as a dessert wine.
SERVING TEMPERATURE: Approx. 7 – 8° C.
PACKAGING: 0,75 l bottle packed in a box of 6.
STAINLESS STEEL PLATED Water Filter Cartridge. The particular PLATED shape of this cartridge has a larger filtering surface in comparison to the traditional smooth type allowing longer maintenance periods as well as a reduced drop pressure.
Water Softener ADM6DC. To be used in the field of industrial and restaurants/bars dishwashers, as well as of household steam-irons. Fitted with suitable equipments to make stainless-steel pipe couplings, welding robots, and air, water and helium tightness testing machines, since each one of these items is tested under 10 bars.
Water Filter Housing SILVER TAP. Expressly designed for protecting liquid suction elecrtopumps, SILVER TAP sand-removal series allow drainage of filtered particles by manually opening the drain ball valve located on the bottom of the bowl, thus simplifying and quickening filter maintenance without having to stop the water flow. The bowl is made of polycarbonate.
Easy Hot 5 Water Filter Housing – 3-Piece filter housings for water treatment.
This product was designed to filter hot water up to a temperature of 100° C. It withstands high temperatures and it is made of materials which make it particularly robust and resistant against collisions. Produced only in red.
Water Treatment Appliance: 3-piece water filter housing Drops 10
Developed for a practical installation in sites and positions of difficult access, also without the help of competent personnel, DROPS filter housing is equipped with a plastic bracket for an easy and stable fixing to the wall by using flexible hoses.
Developed for a practical installation in sites and positions of difficult access, also without the help of competent personnel, DROPS water filter housing is equipped with a plastic bracket for an easy and stable fixing to the wall by using flexible hoses.
Rounded belt in genuine leather Suede sand colour.
Women sportive belt in genuine leather Suede. Rounded belt with sportive stitching in contrast.
Multicolour flower leather applicated.
Lined belt in black colour genuine leather Nabuk.
Satin nickel colour metal buckle.
Height 4,0 cm
Sportive fashion belt in genuine leather Crash black colour
Woman’s fashion belt in genuine leather Crash.
Processing sharp cut.
Aged silver polished metal buckle with crystal colour stone.
Height 2,0 cm
Sportive belt in genuine leather Spider turtledove colour.
Woman’s sportive belt in genuine leather Spider.
Rounded belt with sportive dyed stitching.
Lined belt in natural colour genuine leather belt Nabuk.
Black 106 colour metal buckle and metal loop.
Height 2,0 cm
Studded belt in genuine leather Bull mulberry colour.
Unisex sportive belt in real leather Bull. Processing sharp cut.
Cut on the edges slightly wavy. Studs with aged effect.
Aged burnt ash colour metal buckle.
Height 3,0 cm
Studded belt in genuine leather Gump grey colour.
Unisex sportive belt in genuine leather Gump. Vintage effect. Processing sharp cut. Multicolour studs. Burnt ash colour metal buckle.
Height 3,0 cm
Man’s sportive belt in genuine leather Buttero.
Rounded belt with sportive stitching in contrast. Old brass satin colour metal buckle.
Height 3,5 cm
The parasol “Vela” Sail Shade parasol redefines the concept and architecture of the shadow, unusual and unconventional The cover design evolves taking inspiration from the sea and shaped by the wind, resulting in sinuous and ergonomic lines. From the harmonic fusion between a parasol and a sailing a synergy between material strength and lightness of form, takes shape. A unique item to enhance your outdoor environment.
Mod. Milano Braccio Side Pole Garden Parasol
Harmonious combination of materials like ash wood and white epoxy, polish lacquered components that make this new garden parasol Milano Braccio elegant and suitable for the most exclusive milieux. New vertical aluminium support provided with special blenched ash wood finishing for an unalterable Design.
SPINNER Recessed luminaire with LED lighting system. Adjustable optical assembly is equipped with a front protection louver in temperated glass. With electronic ballast remote.
PHOTO Adjustable projector LED lighting system. Optical assembly is equipped with a front protection louver in tempered glass. With electronic ballast.
KOR INCASSO Recessed projector with LED lighting system. Outer edge with profile. Adjustable optical assembly is equipped with a front protection louver in temperated glass. With electronic ballast remote.
MAX FOOD LED Lighting for Food Industry
Installation: Track
Luminaire housing: aluminium
Louver: tempered glass
Finishing: black,grey,white
Protection class: IP20
Insulation class: I
Power supply: 230V-50Hz
MINI KOR V Adjustable projector with LED lighting system. Optical assembly is equipped with a front protection louver in temperated glass. With electronic ballast.
MINI MAX BINARIO Adjustable projector with LED lighting system. Optical assembly is equipped with a front protection louver in temperated glass. With electronic ballast.
mod. Rimini Braccio. Renewed model swimming-pool parasol completely in steel and aluminium epoxy lacquered colour white.
Perfectly fitting with modern and precious milieux.
The model Galileo Retractable, much appreciated for the technical and practical use, is now also available with the frame powder coated in white. This variant makes the Galileo White even more elegant and sophisticated aluminium parasol.
mod. Palladio standard. Historical model belonging to the Scolaro range since over 30 years. Classic line, but at the same time simply and essential, always in fashion and therefore suitable for all milieux. The most sold parasol. Wide range of sizes and variants.
A wonderful outdoor garden furniture, a patio heater with a visible flame creating a glamorous atmosphere.
Many models for all aesthetic requirements: silver, black, cor-ten and your favorite colors.
Radiant heating flow along the glass tube.
Smart functioning, structured with inox steel and aluminium, anti tipping device windproof and ionization control flame.
Anti scratch feet, wheels set (optional), Belt for fastening any LPG cylinder, running by LPG and Natural Gas.
Keep your outdoor warm, stylish and attractive. Choose Falò EVO.
This is the original Luxury Patio Heater copied in various forms and styles from manufacturers all around the world. Our three sides pyramid patio heater has started a new generation of patio heaters.
Roma gas fire, an amazing high flame view. It creates an atmosphere with a tall flame view.
Visible flame surface for model 90 – L 435 mm X H 986 mm.
Balanced Flue, sealed chamber, Running by LpG & Natural Gas.
Casing for redirecting the heating flow equipped standard.
Designed & Assembled in Italy.
Smart, Stylish, Italkero.
Portofino gas fire Italkero, Short & Tiny, and can be installed anywhere. It creates a cosy atmosphere with a small flame view.
A smart Gas fire extremely simple, “plug and play”.Install it wherever you want.
Stylish, modern and space saving with a visible flame surface: L 435 mm X H 386 mm.
Flame Setting (min/max).
Fiammella Gas Stove. Less noise, less required service. Alternative to any pellet stove.
Power flue gas stove, fully managed by a wireless digital device equipped standard, with a thermostat and timer included. Modulating power.
Practical and easy to install, it creates a warmth atmosphere with a visible flame view inside a glass tube.
Flue line kit included in the package of stove.
Designed by Francisco Gomez Paz, assembled in Italy.
Faro Gas Stove. Less noise, less required service. Alternative to any pellet stove.
Power flue gas stove, fully managed by a wireless digital device equipped standard, with a thermostat and timer included. Modulating power.
Practical and easy to install, it creates a warmth atmosphere with a visible flame view inside a glass tube.
Flue line kit included in the package of stove.
A piezo ignition, noiseless, smart Gas Heater. Echo XC, an eco-stove very easy to install, No power supply required!
It also has small sizes: just 58 cm of height, it’s completely noisless and energy saving-because it doesn’t need power supply.
It has a sealed chamber and an aluminium heating exchanger.
It’s a Gas Heater useful if you need something “natural”; very ecological and noiseless.
Realizziamo contenitori per la raccolta di rifiuti industriali adatti allo spostamento con carrelli elevatori grazie alla presenza di speciali fori alla base per l’introduzione delle forche.
Cassonetti per la carta: i contenitori per la raccolta differenziata sono realizzati per specifiche esigenze di raccolta e riciclo. I contenitori sono caratterizzati da un design che li rende consoni all’ambiente urbano.
contenitori per la raccolta differenziata sono realizzati per specifiche esigenze di raccolta e riciclo. I contenitori sono caratterizzati da un design che li rende consoni all’ambiente urbano.
La gamma dei cassonetti va da quelli a carico laterale (per camion monoperatore) a quelli a carico posteriore, a seconda del sistema preferito dal cliente e dal paese di destinazione.
Disponibili nella versione zincata a caldo per immersione o pre-zincato a caldo e verniciato.
Le verniciature vengono effettuate con polveri poliestere esiccate in forno.
Entrambe le tipologie sono realizzate sia nella versione per rifiuti urbani che con speciali bocchette d’introduzione del materiale per le raccolte differenziate.
I NOSTRI PRODOTTI sono tutti realizzati in acciaio zincato,
Sicurezza, Qualità, Igiene, Robustezza: i nostri cassonetti sono indistruttibili .
Mettiamo al servizio dell’ecologia la nostra esperienza decennale, l’alta qualità dei materiali utilizzati e la tecnologia in costante innovazione.
Ci occupiamo direttamente della progettazione, per poi realizzare internamente gli stampi e il prodotto finito.
Le tipologie sono tutte quelle oggi richieste dal mercato e comunque regolamentate dalla normativa UNI, che vanno quindi dalle raccolte urbane a quelle differenziate di ogni genere.
Cassonetto per Rifiuti: la gamma dei cassonetti va da quelli a carico laterale (per camion monoperatore) a quelli a carico posteriore, a seconda del sistema preferito dal cliente e dal paese di destinazione.
Disponibili nella versione zincata a caldo per immersione o pre-zincato a caldo e verniciato.
Le verniciature vengono effettuate con polveri poliestere esiccate in forno.
Entrambe le tipologie sono realizzate sia nella versione per rifiuti urbani che con speciali bocchette d’introduzione del materiale per le raccolte differenziate.
Double Acting Hydraulic Cylinder with Location Sensor MHP320
Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Steel alloy 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Corrosion resistant rods on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45
Hydraulic Cylinders – Self Assembly Cylinder SHP320
Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Alloy steel 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Rods with corrosion resistance on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45
High Performance Double-acting Hydraulic Cylinder GHP320
Nominal working pressure: 250 bar (25 MPa)
Maximum working pressure: 320 bar (32 MPa)
Liner: E355 SR EN 10305 -1 steel liner, polished inside Ra<0.4 tolerance H8
End plug: S355JR – ASTM A105 steel
Rod: Alloy steel 42CrMo4 +QT chromed Ra<0.2 tolerance f7 corrosion resistance 200h NSS ISO 9227 (Neutral salt spray fog test) rating > 9 ISO 10289. Rods with corrosion resistance on request 500h, 1000h
Pilot boss: Steel C45.
Piston: Steel C45
Insegna per attività di Erboristeria, lavoro eseguito.
RICHIEDI IL TUO DISEGNO, RICHIEDI IL TUO PREVENTIVO.
Scale in ferro per interni
RICHIEDI IL TUO DISEGNO, RICHIEDI IL TUO PREVENTIVO.
Applique Gufo Primavera realizzato in lamiera battuto a mano e traforato con predisposizione luce.
Disponibile in altre colorazioni.
Tavolo linea Ramo, realizzato in ferro sagomato a mano,con ripiano in vetro float 8mm.
Verniciato con colori acrilici, disponibile in tutte le colorazioni.
Dimensione: h75x100cm.
RICHIEDI IL TUO DISEGNO, RICHIEDI IL TUO PREVENTIVO.
Specchio sole, realizzato in lamiera battuta e intagliata, verniciato con colori acrilici.
Disponibile in altre colorazioni.
Applique gufo piumato
misure: m 1,10 x m 1,00
opera unica
T.E.N.S. Therapy Device BE 28 T is a portable devices to T.E.N.S. antalgic therapy and are useful in situations involving pain, in rheumatology cases and in post-traumatic care. The pain is an individual phenomenon, not standardized, and therefore it needs all that technology development and progress can make available. Transcutaneous nerve stimulation has a direct effect on peripheral nerves: it blocks the impulse of pain and increases production of endorphins in the body through small muscle contractions.
The instrument JonoStim is a medical device for electrotherapy able to disburse a continuous current between that could change among 0 and 20 mA.
JonoStim can be used both to favor the introduction of medicines in the body through the skin (ionoforesis), that for the antalgic typical action of the direct current applied through galvanotherapy technique. Besides JonoStim can be used in the treatment of the Hyperidrosys, and in aesthetical treatment against the cellulitis.
Ultrasound Therapy Device Multisonic. The ultrasound is a phisiotherapic technique that applay therapeutic biological effects produced by ultrasound. This is a surface massage technique capable of transmitting mechanical vibrations from a piezoelectric ultrasound probe (from the greek piezo = pressure) to the body tissues.
This device is particularly indicated for the treatment of arthropathy, bruises, calcifications, periarthritis, sprains, beauty treatments (cellulite), tendonitis, epicondylitis and contractures.
Magnet-X Family Magnetotherapy Device. The Magnetic therapy is a form of physiotherapy using the interaction of magnetic fields with the body stimulates osteogenesis and tissue regeneration, thereby promoting an acceleration of all phenomena with clear remedial action Bioregenerating inflammatory and antiedemigena. The anti-inflammatory action, performed by the magnetotherapy, active the cell membranes repolarization in order to recharge and regenerate cells devoid of vital energy.
Electrotherapy Medical Device for Elettrostimulation
BE 28 E is a portable device for Electrical Muscle Stimulation (EMS). After the pain management, the stimulated muscular contraction si the most popular application of electrostimulation. After many years the Electrical Muscle Stimulation has been used to treat and prevent the localised muscular hypotony, in the rehabilitation field, now it has become a recognised and well-proven aid to physical exercise.
FisioStim Professional is the latest generation of ML Elettromedicali’s portable devices for physiotherapy, programmed to generate the most used currents in electrotherapy for both therapeutic, rehabilitative ad sportive use, including the Triangular, Exponential, Rectangular currents are used on muscle denervation.
The current rectangular biphasic, the current Kotz and faradic are current standards used on muscles innervated or healthy, finally, the T.E.N.S., the diadynamic, the microcurrents and antalgic current ionophoresis are used in case of pain, inflammation, injury, tendinitis, etc.
Precast Technology Machines mod. Prima 13: Bi-directional automatic stirrup bender from coil, allows to produce stirrups and cut-to-size bars using wires up to Ø13 mm (#4).
Driven by digital electric servomotors.
– Max. pulling speed: 130 m/min (430 ft/min)
– Straighteners with independent position and adjustment displays for the 2 wires
– Cutting with Brushless motors
– Web Teleassistance
The 3D version allows to produce 3D pieces
Rotor type wire straightening machine for the production of cut-to-size wires up to Ø 6 mm (#3). Driven by digital electric servomotors.
– Max pulling speed: 160 m/ min (525 ft/ min)
– High speed cutting unit with brushless (less than 0.1 sec)
– Web Teleassistance
Available versions:
– Mechanical measuring unit enabling the production of high precision of length bars
Mesh Line Bar-Bar Welding Machines for Reinforcing Mesh
Mesh welding machine for the production of reinforcing mesh working with pre-cut wires.
Range from Ø3 to Ø12 mm.
The structure of this mesh welding line is modular to let you start with a low investment and is been focused on short setup times for both wire diameter and format changes of the processed mesh. Driven by digital electric servomotors.
Multifeed Stirrup Bender – Bar Wiser 22N MF
Bi-directional automatic stirrup bender from bar, allows to produce stirrups and cut-to-size bars using wires up to Ø22 mm (#7). Driven by electric servomotors.
– Max. pulling speed: 120 m/min (394 ft/min)
– Pneumatic pressure on traction wheels
– Virtual mandrel
– Web Teleassistance
The 3D version allows to produce 3D pieces. ASK FOR QUOTATION.
Bar Wiser 28 Bi-directional automatic stirrup bender and bar shaping machine from bar, with 2 bending heads, allows to produce stirrups and cut-to-size bars using wires up to Ø28 mm (#8). The lower bending unit performs downward bends.
Driven by digital electric servomotors.
– Max. pulling speed: 180 m/min (590 ft/min)
– No. 2 bending units (upper and lower)
– Clamp for extraction of the end part of the bar
– Second bending station with clamp for bar descent and supplementary traction to produce rear bends
– Virtual mandrel
– Web Teleassistance
